"Automotive" Fuel Injection Performance

K&N 57-3050 Fuel Injection Performance Kit Gen2 Air Intake Kit



Product Features


More usable power and acceleration throughout the engine's RPM range; Estimated horse power gain claimed by manufacturer 1192 hp @ 5,367 rpm
Easy to install, usually in 90 minutes or less and lasts up to 100,000 miles before service is required, depending on driving conditions
Engineered to specific vehicle design and works with original manufacturer computer systems; See vehicle search above for compatibility
CARB exempt and street legal in all 50 US States and comes with a million mile limited warranty
Over sized conical filters replace OEM filter and air box are and is washable and reusable




Product Specifications


Product Information
Brand: K&N
Manufacturer Part Number: 573050
Sizing and Specifications
Height: 13 inches
Length: 22 inches
Width: 14 inches


Product Description


Designed to provide increased horsepower, the K&N 57-3050 Second Generation Fuel Injection Performance Kit is a quick solution for vehicle owners who are looking for an increase in reliable power. Street legal, installable in 90 minutes or less and built around K&N's High-Flow technology, which utilizes an special oversized and washable cotton gauze air filter and special cold air intake, nonmetallic tubes, the 57-3050 drives a massive amount of air into an engine, which translates into power affordable on virtually any budget.

How High-Flow Technology Works


How does the K&N 57-3050 increase horsepower? By eliminating airflow obstruction in your engine. Restriction of air flow between an air filter and an engine robs even the most powerful engine of horsepower. K&N air intake kits virtually eliminate air path restriction by replacing the standard air filter and the entire air path to the engine. The aerodynamically engineered conduit that makes up the 57-3050 drives a massive amount of air into an engine, which translates into power. This conduit begins with an oversized conical high-flow air filter. This larger filter can fit into the engine compartment using factory holes and mounting points because the K&N 57-3050 replaces your stock intake tube, and air box. This provides more airflow at lower restriction than a standard filter, limited by the size of the factory air box. The oversize air filter also captures and holds more dirt, increasing the service life before a cleaning is required (up to 100,000 miles). The filter is also isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower.


The filter is attaches to a rotationally molded tube made from nonmetallic interlaced high density polyethylene (HDPE). This allows for precision shaping of the tube to reduce turbulence and accelerate airflow into the engine. This is why some K&N tubes have unique shapes or indentations that are specifically engineered for each engine configuration. Finally, the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.

Street Legal


Many K&N intake systems are street legal in all 50 states and include a California Air Resource Board (CARB) Executive Order (EO) number that ensures the kit has been tested to comply with emissions standards. EO numbers apply to the kit as well as the year, make and model it is being installed on. Systems with no EO number are street legal in most states but may not be used on emissions controlled vehicles in the state of California or other states adopting California emission standards. Consult K&N's website to search by part to see which cold air intakes are CARB exempt for which vehicles.


Key Features:


Guaranteed to provide increased horsepower and acceleration (11.92 hp @ 5,367 rpm measured by manufacturer).
Engineered to specific vehicle design. See vehicle search above for compatibility.
Easy to install, usually in 90 minutes or less and lasts up to 100,000 miles before service is required, depending on driving conditions.
CARB exempt and street legal in all 50 US States.
Air filter is washable and reusable for extreme durability, but can also be easily replaced if necessary.
Works with original manufacturer computer systems.
Replaces OEM filter and air box, and is designed to use factory holes and mounting points whenever possible.
Million mile limited warranty.

What's in the Box


1-K&N 57-3050 Second Generation Fuel Injection Performance Kit (includes air intake tube, washable air filter, heat shields, hoses, hose clamps, hardware and detailed instructions necessary for installation).


Limited Warranty


K&N O/E replacement air filters and air intake systems purchased from authorized dealers are backed by a million mile limited warranty from the manufacturer when used primarily on paved roads and on vehicles for which they were designed. If one of these products ever fails to provide complete satisfaction, K&N will replace it at their discretion.


About K&N Engineering


K&N Engineering, of Riverside, California, is the inventor and leading innovator of reusable cotton gauze filter technology for automotive applications. From humble beginnings as a family run business over 35 years ago, K&N Engineering, now a truly global company with offices in the UK and the Netherlands, continues to exist as a family owned business with an enthusiast mindset and a direct connection with motor sports that carries over throughout all levels of management and manufacturing.


* Note: Some FIPK's will not fit on vehicles with lift kits. Diesel pickup truck performance intakes for Power Stroke, Duramax and Cummins Engines are also available.


Product Description


The kit replaces your vehicle's restrictive factory air filter and air intake housing. K&N intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable, reusable and easy to install with tools commonly available.



Increased my MPG's by 2.
Your Installed the K&N 57-3050 on 5.3 liter 2006 GMC Sierra 2WD Crew Cab. You do a lot of highway driving between GA, AL, and TN, and wanted to increase MPG. Before installed the K&N, You was getting around 20-20.5 MPG's highway driving at a constant speed of 70-75 MPH.

Since installing the K&N, You are now getting anywhere from 22-23 MPG's! Now this is also driving a speed of 71-75 MPH. You have noticed that by keeping Your engine @ 1900 RPM or less, Your gas millage dramatically improves with my Sierra.

Now don't get me wrong, but this filter can also cause more gas consumption if you have a heavy foot. If you like to accellerate quick and get up to highway speed fast, this filter will do that for ya. But the downside is that it will cause more gas consumption. Wide Open Throttle = More Air = More GAS!

Overall you are with the K&N 57-3050 AirFilter, and you would recommend it to anyone who does a lot of driving with there truck or SUV and who is looking to safe $ in highway fuel costs.

Please Click Here, to see other models


http://sn.im/auto_spareparts